Xerox WorkCentre C2424DX Service Manual page 165

Service Diagnostics Main Menu Definition Table (Continued)
Menu Item
Main Menu --> Exit Module Menu
Test Name
Report FW Version
Report Status
Monitor Sensors
Exercise Elevator
Home Sequence
Exercise Elevator
Lift Sequence
Exercise Roller
Drive
Reset Exit Module
General Troubleshooting
Description
Reports the current firmware version.
Displays the current status as reported by the exit module
firmware.
Monitors all sensors
associated with the exit
module assembly.
Manually exercise the
sensor flags and verify the
results.
Exercises the exit path
elevator home position and
reports final status.
Moves the pinch roller over
its range of travel, then
reports final status.
Rotates the exit path
transport rollers clockwise,
then counter-clockwise,
performs a seek home
command, and then reports
final status.
This test power cycles the
IIT unit (MEP, Scanner,
DADF).
Description
Results
MEP Home sensor:
Home or Not Home
Exit sensor:
No Paper or Paper
Top Open IIT cover:
Open or Not Open
Output Tray Full sensor
Full or Not Full
Error
Ready
Error
Ready
Error
Ready
Error
Ready or Not Ready
4-7