Download
Share
Print this page
Xerox C2424 - WorkCentre Color Solid Ink Maintenance Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. All in One Printer
  5. WORKCENTRE C2424
  6. Maintenance manual
Xerox C2424 - WorkCentre Color Solid Ink Maintenance Manual

Xerox C2424 - WorkCentre Color Solid Ink Maintenance Manual

User guide section 7: maintenance
Hide thumbs Also See for C2424 - WorkCentre Color Solid Ink:

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Service Manual
Maintenance
This section includes:
■
"Adding Ink" on page 7-32
■
■
■
■
■
■
For safety information, see
Your system needs little maintenance to keep it producing quality prints. Besides adding ink,
you will eventually need to replace the maintenance kit. Order an extra maintenance kit
(standard capacity or extended capacity) when the control panel displays a warning that the
maintenance kit is nearing the end of its life. You must replace the kit when the control panel
displays an error message to replace the maintenance kit.
To view the life remaining and installation date of the maintenance kit:
1.
On the control panel, press the System Setup button.
2.
In the menu, select Information, then press the Enter button.
3.
Select
Supplies
Info, then press the Enter button.
4.
Select
Maintenance Kit
For information about supplies, go to www.xerox.com/office/c2424supplies. Each supply
includes installation instructions with the packaging.
Appendix A
of this guide.
Life, then press the Enter button.
WorkCentre® C2424 Copier-Printer
7-31
Maintenance

Advertisement

loading

Related Manuals for Xerox C2424 - WorkCentre Color Solid Ink

Summary of Contents for Xerox C2424 - WorkCentre Color Solid Ink

  • Page 1: Table Of Contents

    In the menu, select Information, then press the Enter button. Select Supplies Info, then press the Enter button. Select Maintenance Kit Life, then press the Enter button. For information about supplies, go to www.xerox.com/office/c2424supplies. Each supply includes installation instructions with the packaging. WorkCentre® C2424 Copier-Printer 7-31...

  • Page 2: Adding Ink

    To avoid ink jams, never insert broken ink sticks into the ink-loading bins. Caution Use of other than Genuine Xerox WorkCentre C2424 Solid Ink may affect print quality and system reliability. It is the only ink designed and manufactured under strict quality controls by Xerox for specific use with this system.
  • Page 3 Maintenance Follow these steps to load ink. Lift the control panel. 2424-012 Open the ink cover. 2424-013 Determine which ink-loading bin appears low. A label above each bin indicates the color of ink in that bin. Remove the ink stick from its packaging. WorkCentre®...
  • Page 4 Maintenance Place the ink stick into the opening of the appropriate ink-loading bin. Each ink stick is uniquely shaped to fit into the correct ink-loading bin. Do not force the ink stick into the ink-loading bin. 2424-014 Close the ink cover. 2424-015 WorkCentre®...
  • Page 5 Maintenance Close the control panel. 2424-016 To order ink, contact your local reseller or visit the Xerox web site at www.xerox.com/office/c2424supplies. Instructions are included on the package. WorkCentre® C2424 Copier-Printer 7-35...

  • Page 6: Emptying The Waste Tray

    Videos are available with instructions for emptying the waste tray. Videos are located on the User Documentation CD-ROM and at www.xerox.com/office/ c2424support. Caution The system’s interior may be hot. Do not touch the hot surfaces! Open the side door.
  • Page 7 Maintenance Pull the green waste tray (labeled B) completely out of the system. Caution The waste tray may be hot; handle it carefully! 2424-036 Empty the waste tray into a waste container. Waste ink can be discarded as normal office waste.
  • Page 8 Maintenance Insert the waste tray and push it completely into the system. 2424-038 Note The waste tray must be out of the system for more than 5 seconds or you will continue to receive a Empty Waste Tray message on the control panel. Close the side door.

  • Page 9: Replacing The Maintenance Kit

    Order a new maintenance kit when the control panel displays a message telling you that the maintenance kit is nearing the end of its life. To order a new maintenance kit, contact your local reseller or visit the Xerox web site at www.xerox.com/office/c2424supplies. Instructions are included with the new maintenance kit.
  • Page 10 Maintenance Pull the orange maintenance kit (labeled A) completely out of the system. 2424-033 Insert a new maintenance kit. 2424-034 WorkCentre® C2424 Copier-Printer 7-40...

  • Page 11: Cleaning The Paper Release Blade

    Maintenance Close the side door. 2424-039 Cleaning the Paper Release Blade Lift the control panel. 2424-189 WorkCentre® C2424 Copier-Printer 7-41...
  • Page 12 Maintenance Remove paper from the output tray. 2424-018 Open the exit cover. 2424-019 WorkCentre® C2424 Copier-Printer 7-42...
  • Page 13 Maintenance Tilt up the green paper guide toward the front of the system. 8400-042 Clean the white plastic paper release blade on the green paper guide by wiping it with a pre-soaked alcohol cloth (using 90 percent isopropyl alcohol). 2424-156 After the paper release blade is clean, put the green paper guide back in its original position.
  • Page 14 Maintenance Close the exit cover. 2424-022 Close the control panel. 2424-016 WorkCentre® C2424 Copier-Printer 7-44...

  • Page 15: Cleaning The Maintenance Kit Wiper Blade

    Maintenance Cleaning the Maintenance Kit Wiper Blade The maintenance kit contains a wiper blade that removes excess ink. Open the side door. 2424-035 Pull the orange maintenance kit (labeled A) completely out of the system. 2424-033 Use a lint-free cloth to clean the top and upper edges of the flexible plastic wiper blade located next to the roller.
  • Page 16 Maintenance Reinstall the maintenance kit. 2424-034 Close the side door. 2424-039 WorkCentre® C2424 Copier-Printer 7-46...

  • Page 17: Cleaning The Outside Of The System

    Maintenance Cleaning the Outside of the System You can clean the outside of the system with a soft, damp, cloth. You can use a cloth moistened with a mild neutral detergent to remove stains; do not spray detergent directly onto the system.
  • Page 18 Maintenance Wipe the document glass with the cloth or cotton swab. 2424-050 Close the document feeder. WorkCentre® C2424 Copier-Printer 7-48...
  • Page 19 Maintenance To clean the document feeder: Dampen a soft cloth or cotton swab with isopropyl alcohol (using 90 percent isopropyl alcohol). Open the jam access door on the document feeder. 2424-045 Wipe the feeding roller and inside the document feeder with the cloth or cotton swab. 2424-161 WorkCentre®...
  • Page 20 Maintenance Close the jam access door. 2424-047 Lift the document feeder. Wipe the underside of the document feeder with the cloth or cotton swab. 2424-162 Close the document feeder. WorkCentre® C2424 Copier-Printer 7-50...