Xerox WorkCentre C2424DX Service Manual page 188

Paper Trail Edge Times (Continued)
Paper is picked and moved through either the simplex or duplex paper path to determine the
paper trailing edge arrival time at each paper path sensor. R values have alternate definitions or
are unused depending on the pick tray and if simplex or duplex path was selected.
R# Definition
Unused
3
Tray 1 Pick
Unused
2
Unused
3
Common
Deskew Trailing
4
Edge Interval (us)
Preheat Trailing
5
Edge Interval (us)
Strip Trailing Edge
6
Interval (us)
Simplex Path
Exit Trailing Edge
7
Interval (us)
Paper Sensor Bounce Times
Paper is picked and moved through either the simplex paper path to determine the paper trailing
edge bounce interval at each paper path sensor. R values have alternate definitions or are
unused depending on the pick tray and if simplex or duplex path was selected.
R# Definition
Common
Tray
0
4-30
Typical
Value Actions
MFG
Only
MFG
Only
MFG
Only
MFG Reports the interval from the time the engine
software is commanded to start the transfix
Only
process until the deskew sensor deactivates.
(part way through the paper transfix motion).
MFG Reports the interval from the time the engine
software is commanded to start the transfix
Only
process until the preheat sensor deactivates.
(part way through the paper transfix motion).
MFG Reports the interval from the time the engine
software is commanded to start the exit
Only
process until the strip sensor deactivates. (part
way through the paper exit motion).
MFG Reports the interval from the time the engine
software is commanded to start the duplex pick
Only
process until the Exit sensor deactivates.
Typical
Value Actions
MFG Reports the tray from which the paper was
Only picked.
WorkCentre C2424 Service Manual