Xerox WorkCentre C2424DX Service Manual page 211

Drum Maint/Transfix Home
This test drives the process motor a short distance in each direction to verify that the dmfix drive
unit was in its home position.
R# Definition
DM Initial FE Peak
0
(pm motor counts)
DM Initial FE Peak
1
Time (sec)
TF Initial FE Peak
2
(pm motor counts)
TF Initial FE Peak
3
Time (sec)
General Troubleshooting
Typical
Value Actions
MFG Reports the height of the initial peak when
Only starting rotation of the dm drive gear.
MFG Reports the time since the start of CCW
Only motion until the peak was detected.
MFG Reports the height of the initial peak when
Only starting rotation of the tf drive gear.
MFG Reports the time since the start of CW motion
Only until the peak was detected.
4-53