Paper Path
Exit Module Assembly (MEP)
(PL 3.7)
1.
Remove the DADF, scanner assembly, side covers, and inkloader, pages 4 thru
page 13.
2.
Right side instructions
Remove right front screw.
Remove the pulley and belt from the elevator roller to access and remove the
right rear screw.
Remove the screw on the right side (connecting backframe to exit module
and grounding wire).
Disconnect 3 connectors, 2 on I/O board, and 1 to the front cover open
sensor.
8-42
WorkCentre C2424 Service Manual
s2424-219