Xerox WorkCentre C2424DX Service Manual page 331

12. Disconnect the 2 flex cables from the printhead.
Warning
Do not pinch or tear the air hose while removing the printhead as this can
damage the printer.
13.
Lift the printhead free of the printer chassis.
Replacement Notes:
Caution
To avoid damage observe the following order when reinstalling the
printhead:
1.
Ensure that the tilt gear is in the home position (page 6-5).
2.
Rest the printhead on the cradle notches provided (see the previous illustration)
while reconnecting the cable and ZIF connectors.
Service Parts Disassembly
Data Cable
Printhead
Finger Holes
Cradle Notch
s2424-154
8-21