Table of Contents
Advertisement
Wrinkling
Step
Questions and Actions
Verify the media is supported for this system.
1
1.
Print from an unopened fresh ream of paper.
2.
Try a higher quality or heavier media type.
3.
Did this correct the problem?
4.
Increase the margin size of the image.
2
1.
Wrinkling generally occurs in solid fills near
the print's edge.
Did this correct the problem?
2.
Inspect, clean or replace the maintenance
3
1.
kit.
Did this correct the problem?
2.
Inspect the transfix components.
4
1.
Image-Quality Troubleshooting
The print is usually damaged in a corner with solid fills.
This problem is more often seen on short-grain media.
Some wrinkling on envelopes flaps is an acceptable
limitation of this system. You may see wrinkling on the
second side of a 2-sided print on the secondary colors.
An underline under the dimension indicates the direction
of the grain.
s2424-090
Yes
Complete.
Go to Step 2.
Complete.
Go to Step 3.
Complete.
Go to Step 4.
Replace in the following order:
transfix roller
transfix cam
transfix load arm
transfix load module.
No
5-33
Advertisement
Table of Contents
Troubleshooting
