Xerox WorkCentre C2424DX Service Manual page 76

Printhead Restraint
Drum
DM Cam Gear
Printhead
Tilt Gear (Engaged)
Tilt Gear
s2424-035
In the print position (0 degrees), the printhead is forward and resting against the right
and left head-to-drum buttons. The head-to-drum buttons define the space between
the jet stack and the drum. When the process drive is activated, it drives the drum
maintenance camshaft to engage the tilt gear train. The tilt cam tilts the printhead into
the print position. The cam is combined with a missing tooth gear that allows the cam
to be inactive in the print position, freeing the process drive to perform other printer
operations.
The cam has a latching mechanism to unlatch and latch the missing tooth gear to
engage the printhead tilt drive train. The cam's latching mechanism also holds the tilt
gear in place. A leaf spring applies constant pressure to engage the gear when the
latching mechanism is released. The arm of the latching mechanism is inside the
frame; the rest is visible, outside the frame. Arrows located on the latching
mechanism and on the frame indicate when the printhead is in print position. When
the arrows on the latching mechanism and frame align, the printhead is in the print
position and the tilt gear disengages from the process drive.
2-32 WorkCentre C2424 Service Manual