Information" Page; Figure 31: "Information" Page (Example); Table 28: Description Of The Parameters Of The "Information" Page - WAGO -I/O-IPC-C6 Manual

68 Configuration
9.1.2

"Information" Page

After entering the IP address, the start page "Information" for web-based
management appears. This page provides information on the I/O-IPC and the
ETHERNET network.

Figure 31: "Information" page (Example)

The following table explains the parameters listed on the page:

Table 28: Description of the Parameters of the "Information" Page

Coupler Details
Order Number
Processor Type
Fieldbus Type
Firmware Revision
License Information
Kbus FW Revision
Network Details Eth0 (X8)/Eth1 (X9)
State
Mac Address
IP Address
Subnet Mask
758-874/000-110 WAGO-I/O-IPC-C6
Item number for the I/O-IPC
CPU used
Fieldbus type used
Firmware status
Notification that the runtime system CoDeSys is available.
Firmware status of the I/O module interface
Status of the ETHERNET interface (activated/deactivated).
MAC address used to identify and address the I/O-IPC.
Current IP address of the I/O-IPC.
Current subnet mask of the I/O-IPC.
WAGO-I/O-SYSTEM 750
Manual
Version 2.3.0