Table of Contents
Related Manuals for Keysight Technologies N9029AV01-V19
Summary of Contents for Keysight Technologies N9029AV01-V19
- Page 1 N9029AV01-V19, V1B, V2B Signal Analyzer Frequency Extension Module and Accessories The Keysight N9029AV01-V19, V1B and V2B Signal Analyzer Frequency Extension (SAX) Modules are manufactured by Virginia Diodes, Inc. (VDI). USER'S GUIDE...
-
Page 2: Safety Notices
No additional DOCUMENT THAT CONFLICT WITH government requirements THESE TERMS, THE WARRANTY beyond those set forth in the © Keysight Technologies, Inc. TERMS IN THE SEPARATE EULA shall apply, except to the 2016-2022 AGREEMENT WILL CONTROL. extent that those terms, rights, or... - Page 3 Signal Analyzer Frequency Extension Module and Accessories The Keysight N9029AV01-V19, V1B and V2B Signal Analyzer Frequency Extension (SAX) Modules are manufactured by Virginia Diodes, Inc. (VDI). The Mixer/Amplifier/Multiplier Chain (MixAMC) modules are for use with the Keysight X-Series Signal Analyzer with the External Mixer Option (EXM), required.
- Page 4 170 to 260 N9029AV05 WR5.1SAX 140 to 220 N9029AV06 WR6.5SAX 110 to 170 N9029AV08 WR8.0SAX 90 to 140 N9029AV10 WR10SAX 75 to 110 N9029AV12 WR12SAX 60 to 90 N9029AV15 WR15SAX 50 to 75 N9029AV19 WR19SAX 40 to 60 Keysight Technologies N9030-90061...
- Page 5 Adds data on USB down to 48 GHz (for N9029AV15 only) Adds data on USB down to 73 GHz (for N9029AV10 only) DC9 SAX with high sensitivity Adds Mixer Cal Files for Automotive Radar Solution (for N9029AV12 only) Keysight Technologies N9030-90061...
- Page 6 [Input/Output] > External Mixer > Signal ID > On > Signal ID Mode > Image Suppress Multi-Touch Input > Output > Signal ID > On > Signal ID Mode > Image Suppress There is data on the USB drive that can be used to create a corrections file to improve amplitude accuracy. Keysight Technologies N9030-90061...
- Page 7 1. Connect RF source to LO input (H), such as an E8257D PSG. 2. Connect RF signal to be up-converted to the IF input, such as an E8257D PSG. Other modes of operation may be found in the VDI documentation. Keysight Technologies N9030-90061...
-
Page 8: Power Requirements
To prevent electrical shock, disconnect the instrument from mains before cleaning. Use a dry cloth or one slightly dampened with water to clean external case parts. Do not attempt to clean internally. Keysight Technologies N9030-90061... -
Page 9: Safety And Information
Only Keysight approved accessories shall be used. The main power cord can be used as the system disconnecting device. It disconnects the mains circuits from the mains supply. Keysight Technologies N9030-90061... -
Page 10: Instrument Markings
AS/NZS CISPR 11 • ICES/NMB-001 This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme a la norme NMB-001 du Canada. To find a current Declaration of Conformity for a specific Keysight product, go to: http://regulations.about.keysight.com/DoC/search.htm Keysight Technologies N9030-90061... -
Page 11: Acoustic Statement (European Machinery Directive)
This is a sensitive measurement apparatus by design and may have some performance loss (spurs up to 55 dB above a noise floor) when exposed to ambient continuous electromagnetic phenomenon in the range of 80 MHz - 6 GHz when tested per IEC 61000-4-3. Keysight Technologies N9030-90061... -
Page 12: Accessories And Information
Signal Analyzer On-line Help System for operational information. Information is also available http://vadiodes.com Keysight Technologies does not guarantee the performance of the VDI modules, or system performance. However, if warranty or repair is needed Keysight will provide full support to our customer. - Page 13 Keysight Technologies N9030-90061...
- Page 14 This information is subject to change without notice. © Keysight Technologies 2016-2022 Print Date: August 2022 Supersedes: February 2022 www.keysight.com...