Lan Commands; Lan:dhcp - Rigol MSO2000A Series Programming Manual

RIGOL

:LAN Commands

:LAN:DHCP


:LAN:AUToip

:LAN:GATeway

:LAN:DNS

:LAN:MAC?

:LAN:MANual

:LAN:INITiate

:LAN:IPADdress

:LAN:SMASk

:LAN:STATus?

:LAN:VISA?

:LAN:APPLy

:LAN:DHCP
Syntax
:LAN:DHCP <bool>
:LAN:DHCP?
Description
Enable or disable the DHCP configuration mode; or query the current status of the DHCP configuration
mode.
Parameter
Name Type
<bool> Bool
Explanation
When the three IP configuration types are all turned on, the priority of the parameter configuration

from high to low is "DHCP", "Auto IP" and "Static IP". The three IP configuration types cannot be all
turned off at the same time.
When the DHCP configuration mode is valid, the DHCP server in the current network will assign the

network parameters (such as the IP address) for the oscilloscope.
Return Format
The query returns 0 or 1.
2-120
Range
{{0|OFF}|{1|ON}}
Default
1|ON
MSO2000A/DS2000A Programming Guide
2 Command System