Rigol MSO2000A Series Programming Manual page 309

2 Command System
:TRIGger:PULSe:WHEN
Syntax
:TRIGger:PULSe:WHEN <when>
:TRIGger:PULSe:WHEN?
Description
Set or query the trigger condition of pulse trigger.
Parameter
Name Type
<when> Discrete
Explanation
PGReater (

command). The oscilloscope triggers when the positive pulse width of the input signal is greater than
the specified pulse width.
PLESs ( ):you need to specify a pulse width (refer to the

The oscilloscope triggers when the positive pulse width of the input signal is lower than the specified
pulse width.
NGReater (

command). The oscilloscope triggers when the negative pulse width of the input signal is greater
than the specified pulse width.
NLESs ( ):you need to specify a pulse width (refer to the

The oscilloscope triggers when the negative pulse width of the input signal is lower than the specified
pulse width.
PGLess ( ):you need to specify an upper (refer to the

a lower (refer to the
when the positive pulse width of the input signal is greater than the specified lower pulse width and
lower than the upper pulse width.
NGLess ( ):you need to specify an upper (refer to the

a lower (refer to the
when the negative pulse width of the input signal is greater than the specified lower pulse width and
lower than the upper pulse width.
Return Format
The query returns PGR, PLES, NGR, NLES, PGL or NGL.
MSO2000A/DS2000A Programming Guide
Range
{PGReater|PLESs|NGReater|NLESs|PGLess|NGLess}
): you need to specify a pulse width (refer to the
):you need to specify a pulse width (refer to the
:TRIGger:PULSe:LWIDth
:TRIGger:PULSe:LWIDth
:TRIGger:PULSe:LWIDth
:TRIGger:PULSe:UWIDth
:TRIGger:PULSe:LWIDth
:TRIGger:PULSe:UWIDth
:TRIGger:PULSe:UWIDth
command) pulse width. The oscilloscope triggers
:TRIGger:PULSe:UWIDth
command) pulse width. The oscilloscope triggers
RIGOL
Default
PGReater
command).
command).
command) and
command) and
2-293