Mask:source; Mask:operate - Rigol MSO2000A Series Programming Manual

RIGOL

:MASK:SOURce

Syntax
:MASK:SOURce <source>
:MASK:SOURce?
Description
Set or query the measurement source of the pass/fail test.
Parameter
Name Type
<source> Discrete
Explanation
Only the channel enabled can be selected as the measurement source of the pass/fail test.
Return Format
The query returns CHAN1 or CHAN2.

:MASK:OPERate

Syntax
:MASK:OPERate <oper>
:MASK:OPERate?
Description
Run or stop the pass/fail test; or query the current status of the pass/fail test.
Parameter
Name Type
<oper> Discrete
Explanation
Before executing this command, use the
Return Format
The query returns RUN or STOP.
2-128
Range
{CHANnel1|CHANnel2}
Range
{RUN|STOP}
:MASK:ENABle
Default
CHANnel1
Default
STOP
command to enable the pass/fail test.
MSO2000A/DS2000A Programming Guide
2 Command System