System:aoutput; System:autoscale - Rigol MSO2000A Series Programming Manual

RIGOL

:SYSTem:AOUTput

Syntax
:SYSTem:AOUTput <aux output>
:SYSTem:AOUTput?
Description
Set or query the type of the signal output from the [Trigger Out] connector at the rear panel.
Parameter
Name
<aux output>
Explanation
TOUT: output a signal that can reflect the current acquisition rate of the oscilloscope via the

[Trigger Out] connector each time the oscilloscope triggers.
PFAil: output a pulse via the [Trigger Out] connector when a failed waveform is detected. You can

connect the signal to other control systems to view the test result.
Return Format
The query returns TOUT or PFA.

:SYSTem:AUToscale

Syntax
:SYSTem:AUToscale <opt>
:SYSTem:AUToscale?
Description
Disable or recover the AUTO function; or query the status of the AUTO function.
Parameter
Name
<opt>
Explanation
By default, pressing AUTO or sending the
operation. This command can be used to disable or recover this function.
0|OFF: disable the AUTO function

1|ON: recover the AUTO function

Return Format
The query returns 0 or 1.
2-240
Type Range
Discrete {TOUT|PFAil}
Type Range
Bool {{0|OFF}|{1|ON}}
:AUToscale
Default
TOUT
Default
1|ON
command can execute a waveform auto setting
MSO2000A/DS2000A Programming Guide
2 Command System