Bus<N>:Parallel - Rigol MSO2000A Series Programming Manual

2 Command System
:BUS<n>:PARallel
:BUS<n>:PARallel:CLK

:BUS<n>:PARallel:SLOPe

:BUS<n>:PARallel:BSET

:BUS<n>:PARallel:THReshold

:BUS<n>:PARallel:OFFSet

:BUS<n>:PARallel:CLK
Syntax
:BUS<n>:PARallel:CLK <sour>
:BUS<n>:PARallel:CLK?
Description
Set or query the clock channel source of parallel decoding on the specified bus.
Parameter
Name Type
<n> Discrete
<sour> Discrete
Explanation
When OFF is selected, no clock channel is set and the oscilloscope samples data once the channel data
jumps. At this point, the edge set by the
Return Format
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, CHAN1,
CHAN2 or OFF.
MSO2000A/DS2000A Programming Guide
Range
{1|2}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|
D12|D13|D14|D15|CHANnel1|CHANnel2|OFF}
:BUS<n>:PARallel:SLOPe
Default
--
CHANnel1
command can be ignored.
RIGOL
2-19