[:Trace<N>]:Data:value - Rigol MSO2000A Series Programming Manual

RIGOL
[:TRACe<n>]:DATA:VALue
Syntax
[:TRACe<n>]:DATA:VALue VOLATILE,<point>,<data>
[:TRACe<n>]:DATA:VALue? VOLATILE,<point>
Description
Modify or query the decimal value of the specified point in the volatile memory of the built-in signal
source.
Parameter
Name Type
<point> Integer
<data> Integer
<n> Integer
Explanation
For the query command, when <point> is greater than 16384 or lower than 1, the query returns the

value corresponds to the 16384
You can use the formula "(amplitude value currently set/16384)×<data>" to calculate the actual

voltage corresponding to each point in the volatile memory.
Return Format
The query returns an integer.
Example
:DATA:VALue VOLATILE,200,500
:DATA:VALue? VOLATILE,200
2-264
Range
1 to 16384
0 to 16383
{1|2}
th
or first point respectively.
2 Command System
Default
--
--
1
MSO2000A/DS2000A Programming Guide