2 Command System
:BUS<n>:PARallel:OFFSet
Syntax
:BUS<n>:PARallel:OFFSet <val>
:BUS<n>:PARallel:OFFSet?
Description
Set or query the vertical offset in parallel decoding on the specified bus.
Parameter
Name
Type
<n>
Discrete
<val>
Integer
[1]
Note
: The screen display is normal and the statistic function is not enabled (refer to
the
:MEASure:STATistic:DISPlay
[2]
Note
: The screen display is normal and the statistic function is enabled (refer to the
command).
[3]
Note
: The screen is divided into two windows (refer to the
commands).
Explanation
Before using this command, enable the bus display (refer to the
When the data line locates at the middle of the screen, <val> is 0; when it locates at the upper side
of the screen, <val> is positive; when it locates at the lower side of the screen, <val> is negative.
Return Format
The query returns the offset in integer.
MSO2000A/DS2000A Programming Guide
Range
{1|2}
[1]
Normal
: -166 to 148
[2]
Statistic
: -163 to 143
[3]
Half screen
: -103 to 52
command).
Default
--
0
:TIMebase:DELay:ENABle
:BUS<n>:DISPlay
RIGOL
:MEASure:STATistic:DISPlay
and
:CALCulate:FFT:SPLit
command).
2-23