Rigol MSO2000A Series Programming Manual page 326

RIGOL
:TRIGger:SLOPe:WHEN
Syntax
:TRIGger:SLOPe:WHEN <when>
:TRIGger:SLOPe:WHEN?
Description
Set or query the trigger condition of slope trigger.
Parameter
Name Type
<when> Discrete
Explanation
PGReater: you need to specify a time value (refer to the

oscilloscope triggers when the positive slope time of the input signal is greater than the specified
time.
PLESs: you need to specify a time value (refer to the

oscilloscope triggers when the positive slope time of the input signal is lower than the specified time.
NGReater: you need to specify a time value (refer to the

oscilloscope triggers when the negative slope time of the input signal is greater than the specified
time.
NLESs: you need to specify a time value (refer to the

oscilloscope triggers when the negative slope time of the input signal is lower than the specified
time.
PGLess: you need to specify an upper limit (refer to the

lower limit (refer to the
the positive slope time of the input signal is greater than the specified lower limit and lower than the
specified upper limit.
NGLess: you need to specify an upper limit (refer to the

lower limit (refer to the
the negative slope time of the input signal is greater than the specified lower limit and lower than the
specified upper limit.
Return Format
The query returns PGR, PLES, NGR, NLES, PGL or NGL.
2-310
Range
{PGReater|PLESs|NGReater|NLESs|PGLess|NGLess}
:TRIGger:SLOPe:TLOWer
:TRIGger:SLOPe:TLOWer
:TRIGger:SLOPe:TLOWer
:TRIGger:SLOPe:TUPPer
:TRIGger:SLOPe:TLOWer
:TRIGger:SLOPe:TUPPer
:TRIGger:SLOPe:TUPPer
command) of time. The oscilloscope triggers when
:TRIGger:SLOPe:TUPPer
command) of time. The oscilloscope triggers when
MSO2000A/DS2000A Programming Guide
2 Command System
Default
PGReater
command). The
command). The
command). The
command). The
command) and a
command) and a