Ese - Rigol MSO2000A Series Programming Manual

2 Command System

*ESE

Syntax
*ESE <mask>
*ESE?
Description
Set or query the enable register for the standard event status register set.
Parameter
Name
<mask>
Explanation
<mask> is the sum of the binary weights (expressed in decimal) of all the bits between bit 0 and bit

7 that have already been set. If the bit has already been set, the corresponding binary bit is 1;
otherwise, it is 0.
Definitions of the bits in ESE register:

Bit Weights
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
Return Format
The query returns an integer between 0 and 255 which equals the sum of the binary weights (expressed
in decimal) of all the bits that have already been set in the register.
For example, the query returns 144 if bit 4 (16 in decimal) and bit 7 (128 in decimal) are enabled.
Example
*ESE 16 /*Bit 4 is enabled*/
*ESE? /*The query returns 16*/
MSO2000A/DS2000A Programming Guide
Type Range
Integer 0 to 255
Name Enable
PON Power On
URQ User Request
CME Command Error
EXE Execution Error
DDE Dev. Dependent Error
QYE Query Error
RQL Request Control
OPC Operation Complete
Default
0
RIGOL
2-5