Waveform:source - Rigol MSO2000A Series Programming Manual

RIGOL

:WAVeform:SOURce


:WAVeform:MODE

:WAVeform:FORMat

:WAVeform:POINts

:WAVeform:DATA?

:WAVeform:XINCrement?

:WAVeform:XORigin?

:WAVeform:XREFerence?

:WAVeform:YINCrement?

:WAVeform:YORigin?

:WAVeform:YREFerence?

:WAVeform:STARt

:WAVeform:STOP

:WAVeform:BEGin

:WAVeform:END

:WAVeform:RESet

:WAVeform:PREamble?

:WAVeform:STATus?

:WAVeform:SOURce
Syntax
:WAVeform:SOURce <source>
:WAVeform:SOURce?
Description
Set or query the channel source of waveform data reading.
Parameter
Name Type
<source> Discrete
Explanation
The following two methods can be used to set FFT as the channel source for waveform data reading.

Set <source> to FFT
Set the operation source of MATH to FFT and then set <source> to MATH.
When LA is set as the channel source of waveform data reading, the return format is WORD; namely,

each 2 bytes represent a group of digital signal states and each bit represents a single digital signal
channel. The highest bit represents D0 and the lowest bits represents D15.
Return Format
The query returns CHAN1, CHAN2, MATH, FFT or LA.
2-330
Range
{CHANnel1|CHANnel2|MATH|FFT|LA}
2 Command System
Default
CHANnel1
MSO2000A/DS2000A Programming Guide