Display:type - Rigol MSO2000A Series Programming Manual

2 Command System

:DISPlay:TYPE

Syntax
:DISPlay:TYPE <type>
:DISPlay:TYPE?
Description
Set or query the display mode of the waveform on the screen.
Parameter
Name Type
<type> Discrete
Explanation
VECTors: the sample points are connected by lines and displayed. Normally, this mode can provide

the most vivid waveform to view the steep edge of the waveform (such as square waveform).
DOTS: display the sample points directly. You can directly view each sample point and use the cursor

to measure the X and Y values of the sample point.
Return Format
The query returns VECT or DOTS.
MSO2000A/DS2000A Programming Guide
Range
{VECTors|DOTS}
Default
VECTors
RIGOL
2-89