RIGOL
:MEASure:VBASe
Syntax 1
:MEASure:VBASe <chan>
Description 1
Enable the amplitude base value measurement function of the specified channel.
Syntax 2
:MEASure:VBASe? <chan>
Description 2
Enable the amplitude base value measurement function of the specified channel and return the
measurement result.
Parameter
Name
Type
<chan>
Discrete
Explanation
The unit is determined by the unit selected for the source channel (refer to the
command).
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:VBASe CHANnel1
:MEASure:VBASe? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the amplitude base measurement values of the specified channel waveform.
Sending the following commands will enable the statistic function automatically.
:MEASure:VBASe:SMAXimum?
:MEASure:VBASe:SMINimum?
:MEASure:VBASe:SCURrent?
:MEASure:VBASe:SAVerage?
:MEASure:VBASe:SDEViation?
2-186
Range
{CHANnel1|CHANnel2|MATH}
2 Command System
Default
--
:CHANnel<n>:UNITs
MSO2000A/DS2000A Programming Guide