RIGOL
:DISPlay Commands
:DISPlay:CLEar
:DISPlay:TYPE
:DISPlay:GRADing:TIME
:DISPlay:WBRightness
:DISPlay:GRID
:DISPlay:GBRightness
:DISPlay:MPERsistence
:DISPlay:DATA?
:DISPlay:CLEar
Syntax
:DISPlay:CLEar
Description
Clear all the waveforms on the screen. The function of this command is the same as that of CLEAR at the
front panel.
Explanation
If the oscilloscope is in RUN state (refer to the
displayed.
You can also use the
2-88
:CLEar
command to clear all the waveforms on the screen.
:RUN
command), new waveforms will still be
MSO2000A/DS2000A Programming Guide
2 Command System