Rigol MSO2000A Series Programming Manual page 121

2 Command System
:FUNCtion:WANalyze:TDISp
Syntax
:FUNCtion:WANalyze:TDISp <bool>
:FUNCtion:WANalyze:TDISp?
Description
Enable or disable the template display; or query the current status of template display.
Parameter
Name Type
<bool> Bool
Return Format
The query returns 0 or 1.
:FUNCtion:WANalyze:SETup:SSTart
:FUNCtion:WANalyze:SETup:SSENd
Syntax
:FUNCtion:WANalyze:SETup:SSTart <start>
:FUNCtion:WANalyze:SETup:SSTart?
:FUNCtion:WANalyze:SETup:SSENd <end>
:FUNCtion:WANalyze:SETup:SSENd?
Description
Set or query the screen start point or end point of waveform analysis.
Parameter
Name Type
<start> Integer
<end> Integer
Explanation
The screen start point set should be less than the "screen end-10".

The screen end point set should be greater than the "screen start+10".

Return Format
The query returns an integer.
MSO2000A/DS2000A Programming Guide
Range
{{0|OFF}|{1|ON}}
Range
5 to 685
15 to 695
Default
0|OFF
Default
5
695
RIGOL
2-105