System:beeper:state; System:communicate:lan[:Self]:Apply - Rigol SA5000 Series Programming Manual

RIGOL

:SYSTem:BEEPer:STATe

Syntax
:SYSTem:BEEPer:STATe OFF|ON|0|1
:SYSTem:BEEPer:STATe?
Description
Turns on or off the beeper.
Queries the on/off status of the beeper.
Parameter
Name
--
Return Format
The query returns 0 or 1.
Example
The following command turns on the beeper.
:SYSTem:BEEPer:STATe ON or :SYSTem:BEEPer:STATe 1
The following query returns 1.
:SYSTem:BEEPer:STATe?

:SYSTem:COMMunicate:LAN[:SELF]:APPLy

Syntax
:SYSTem:COMMunicate:LAN[:SELF]:APPLy
Description
Applies the LAN interface parameter settings.
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe OFF|ON|0|1
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe?
Description
Enables or disables the auto IP setting mode.
Queries the status of the auto IP setting mode.
Parameter
Name
--
Remarks
The analyzer attempts to acquire the IP address configuration according to the sequence of DHCP, Auto IP,
and Manual IP. These three modes cannot be disabled at the same time.
ON|1: enables the auto IP mode.
OFF|0: disables the auto IP mode and selects DHCP configuration mode.
Return Format
The query returns 0 or 1.
2-66
Type
Bool
Type
Bool
Range
OFF|ON|0|1
Range
OFF|ON|0|1
Chapter 2 Command System
Default
OFF|0
Default
OFF|0
VSA Programming Guide