Rigol MSO2000A Series Programming Manual page 36

RIGOL
:BUS<n>:PARallel:SLOPe
Syntax
:BUS<n>:PARallel:SLOPe <pos>
:BUS<n>:PARallel:SLOPe?
Description
Set or query the edge of the clock on which the oscilloscope samples the channel data.
Parameter
Name Type
<n> Discrete
<pos> Discrete
Explanation
POSitive: rising edge

NEGative: falling edge
BOTH: rising/falling edge
When no clock channel is set (refer to the

samples data once the channel data jumps and the edge set by this command will be ignored.
Return Format
The query returns POS, NEG or BOTH .
2-20
Range
{1|2}
{POSitive|NEGative|BOTH}
:BUS<n>:PARallel:CLK
2 Command System
Default
--
POSitive
command), the oscilloscope
MSO2000A/DS2000A Programming Guide