[:Trace<N>]:Data:points:interpolate - Rigol MSO2000A Series Programming Manual

2 Command System
[:TRACe<n>]:DATA:POINts:INTerpolate
Syntax
[:TRACe<n>]:DATA:POINts:INTerpolate <mode>
[:TRACe<n>]:DATA:POINts:INTerpolate?
Description
Set or query the interpolation mode between the defined points of the arbitrary waveform of the built-in
signal source.
Parameter
Name Type
<mode> Discrete
<n> Discrete
Explanation
LINear: linear interpolation. The waveform editor connects two defined points using a straight line.

OFF: turn off the interpolation mode. The waveform editor will keep a constant voltage level between

two points and create a ladder-like waveform.
Return Format
The query returns LIN or OFF.
MSO2000A/DS2000A Programming Guide
Range
{LINear|OFF}
{1|2}
Default
OFF
1
RIGOL
2-263