Trigger:spi - Rigol MSO2000A Series Programming Manual

RIGOL

:TRIGger:SPI

:TRIGger:SPI:CLEVel

:TRIGger:SPI:DLEVel

:TRIGger:SPI:DATA

:TRIGger:SPI:SCL

:TRIGger:SPI:SDA

:TRIGger:SPI:SLOPe

:TRIGger:SPI:TIMeout

:TRIGger:SPI:WIDTh

:TRIGger:SPI:CLEVel
:TRIGger:SPI:DLEVel
Syntax
:TRIGger:SPI:CLEVel <level>
:TRIGger:SPI:CLEVel?
:TRIGger:SPI:DLEVel <level>
:TRIGger:SPI:DLEVel?
Description
Set or query the trigger level of SCL or SDA in SPI trigger. The unit is the same with the current amplitude
unit.
Parameter
Name Type Range
When the clock source or data source is CHANnel1 or CHANnel2:
<level> Real -5×VerticalScale–OFFSet to +5×VerticalScale–OFFSet
When the clock source or data source is any of D0-D15: -20V to 20V
Note: For the VerticalScale, refer to the
the :CHANnel<n>:OFFSet
Return Format
The query returns the trigger level in scientific notation.
2-312
:CHANnel<n>:SCALe
command.
command. For the OFFSet, refer to
MSO2000A/DS2000A Programming Guide
2 Command System
Default
0