Measure:adisplay; Measure:amsource - Rigol MSO2000A Series Programming Manual

RIGOL

:MEASure:ADISplay

Syntax
:MEASure:ADISplay <bool>
:MEASure:ADISplay?
Description
Enable or disable all measurement; or query the current status of all measurement.
Parameter
Name Type
<bool> Bool
Explanation
All measurement can measure all the time and voltage parameters of the current measurement

source. Each measurement source has 21 measurement parameters and you can measure the three
measurement sources (CH1, CH2 and MATH) at the same time.
11 voltage measurement items: maximum, minimum, peak-peak, top, bottom, amplitude, average,

RMS, period RMS, overshoot and preshoot.
8 time measurement items: period, frequency, rise time, fall time, positive pulse width, negative

pulse width, positive duty cycle and negative duty cycle.
2 other measurement items: area and period area.

Return Format
The query returns 0 or 1.

:MEASure:AMSource

Syntax
:MEASure:AMSource <chan>[,<chan>[,<chan>]]
:MEASure:AMSource?
Description
Set or query the signal source of the all measurement parameters.
Parameter
Name Type
<chan> Discrete
Return Format
The query returns CHAN1, CHAN2 or MATH. Multiple signal sources are separated by commas.
2-138
Range
{{0|OFF}|{1|ON}}
Range
{CHANnel1|CHANnel2|MATH}
2 Command System
Default
0|OFF
Default
CHANnel1
MSO2000A/DS2000A Programming Guide