Channel<N>:Probe; Channel<N>:Units - Rigol MSO2000A Series Programming Manual

2 Command System
:CHANnel<n>:PROBe
Syntax
:CHANnel<n>:PROBe <atten>
:CHANnel<n>:PROBe?
Description
Set or query the probe attenuation ratio of the specified analog channel.
Parameter
Name Type
<n> Discrete
<atten> Discrete
Explanation
After setting the probe ratio, multiply the sampled signal by the specified multiple and then display

the result (the actual amplitude of the signal will not be affected).
Setting the probe ratio affects the range of the vertical scale.

Return Format
The query returns the attenuation ratio currently set.
:CHANnel<n>:UNITs
Syntax
:CHANnel<n>:UNITs <units>
:CHANnel<n>:UNITs?
Description
Set or query the amplitude display unit of the specified analog channel.
Parameter
Name Type
<n> Discrete
<units> Discrete
Return Format
The query returns VOLT, WATT, AMP or UNKN.
MSO2000A/DS2000A Programming Guide
Range
{1|2}
{0.01|0.02|0.05|0.1|0.2|0.5|1|2|5|10|20
|50|100|200|500|1000}
Range
{1|2}
{VOLTage|WATT|AMPere|UNKNown}
Default
--
1
Default
--
VOLTage
RIGOL
2-71