Rigol MSO2000A Series Programming Manual page 261

2 Command System
TLEVel: press down the trigger level adjustment knob; namely set the trigger level to 0.

TMENu: press MENU in the trigger control area.

TFORce: press FORCE in the trigger control area.

TMODe: press MODE in the trigger control area.

RSTop: press RUN/STOP.

QPRInt: press the print key.

SRECord|ERECord: start or stop recording waveforms.

PPAuse: start, pause or resume the playback of the recorded waveform (only valid when waveforms

are recorded).
FFP10|FFP20|FFP30|FFP40|FFP50|FFP60|FFP70: rotate the outer layer of the navigation knob

clockwise. The number in the paramerter denotes the rotation step. Larger number corresponds to
faster rotating speed.
FFN5|FFN10|FFN20|FFN30|FFN40|FFN50|FFN60|FFN70: rotate the outer layer of the navigation

knob counterclockwise. The number in the paramerter denotes the rotation step. Larger number
corresponds to faster rotating speed.
MSO2000A/DS2000A Programming Guide
RIGOL
2-245