Measure:ftime - Rigol MSO2000A Series Programming Manual

RIGOL

:MEASure:FTIMe

Syntax 1
:MEASure:FTIMe <chan>
Description 1
Enable the fall time measurement function of the specified channel.
Syntax 2
:MEASure:FTIMe? <chan>
Description 2
Enable the fall time measurement function of the specified channel and return the measurement result
(the unit is s).
Parameter
Name Type
<chan> Discrete
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:FTIMe CHANnel1
:MEASure:FTIMe? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the fall time measurement values of the specified channel waveform. Sending
the following commands will enable the statistic function automatically.
:MEASure:FTIMe:SMAXimum?

:MEASure:FTIMe:SMINimum?

:MEASure:FTIMe:SCURrent?

:MEASure:FTIMe:SAVerage?

:MEASure:FTIMe:SDEViation?

2-156
Range
{CHANnel1|CHANnel2|MATH}
Default
--
MSO2000A/DS2000A Programming Guide
2 Command System