Rigol MSO2000A Series Programming Manual page 45

2 Command System
:BUS<n>:RS232:PACKet
Syntax
:BUS<n>:RS232:PACKet <bool>
:BUS<n>:RS232:PACKet?
Description
Enable or disable the packet end in data transmission; or query the current status of the packet end in
data transmission.
Parameter
Name
<n>
<bool>
Explanation
When the packet end is enabled, several data blocks are combined according to the packet end.
Return Format
The query returns 0 or 1.
:BUS<n>:RS232:PEND
Syntax
:BUS<n>:RS232:PEND <package end>
:BUS<n>:RS232:PEND?
Description
Set or query the packet end of data transmission.
Parameter
Name
<n>
<package end>
Explanation
The hexadecimal numbers corresponding to the parameters are as follows.
NULL: 00 LF: 0A
Return Format
The query returns NULL, LF, CR, SP or FF.
MSO2000A/DS2000A Programming Guide
Type Range
Discrete {1|2}
Bool {{0|OFF}|{1|ON}}
Type Range
Discrete {1|2}
Discrete {NULL|LF|CR|SP|FF}
CR: 0D SP: 20 FF: FF
RIGOL
Default
--
0|OFF
Default
--
NULL
2-29