Lan:initiate; Lan:ipaddress - Rigol MSO2000A Series Programming Manual

RIGOL

:LAN:INITiate

Syntax
:LAN:INITiate
Description
Initialize the network parameters. Before using this command, make sure that the oscilloscope has been
connected to the network correctly.

:LAN:IPADdress

Syntax
:LAN:IPADdress <string>
:LAN:IPADdress?
Description
Set or query the IP address of the instrument.
Parameter
Name Type
<string> ASCII string
Explanation
When setting <string>, the range of the first nnn is from 0 to 223 (except 127) and the ranges of the

other three nnn are from 0 to 255.
When using this command, the IP configuration mode should be Static IP mode (refer to

the :LAN:MANual
Return Format
The query returns the current IP address in string.
2-124
Range
nnn,nnn,nnn,nnn
command) and DHCP and Auto IP are disabled.
2 Command System
Default
--
MSO2000A/DS2000A Programming Guide