Display:grading:time; Display:wbrightness - Rigol MSO2000A Series Programming Manual

RIGOL

:DISPlay:GRADing:TIME

Syntax
:DISPlay:GRADing:TIME <time>
:DISPlay:GRADing:TIME?
Description
Set or query the persistence time and the unit is s.
Parameter
Name Type
<time> Discrete
Explanation
MIN: set the persistence time to its minimum to view the waveform changing in high refresh rate.

Specific Values: a certain value between 0.05s and 20s, enable to observe glitch that changes

relatively slowly or glitch with low occurrence probability.
INFinite: in this mode, the oscilloscope displays the newly acquired waveform without clearing the

waveform formerly acquired. Enable to measure noise and jitter as well as capture incidental events.
Return Format
The query returns the persistence time set.

:DISPlay:WBRightness

Syntax
:DISPlay:WBRightness <time>
:DISPlay:WBRightness?
Description
Set or query the waveform brightness and the unit is %.
Parameter
Name Type
<time> Integer
Return Format
The query returns an integer between 0 and 100.
2-90
Range
{MIN|0.05|0.1|0.2|0.5|1|2|5|10|20|INFinite}
Range
0 to 100
2 Command System
Default
MIN
Default
50
MSO2000A/DS2000A Programming Guide