Measure:source - Rigol MSO2000A Series Programming Manual

2 Command System
:MEASure:VAMP

:MEASure:VAVG

:MEASure:VBASe

:MEASure:VMAX

:MEASure:VMIN

:MEASure:VPP

:MEASure:VRMS

:MEASure:PVRMs

:MEASure:VTOP

:MEASure:MARea

:MEASure:MPARea


:MEASure:SOURce

Syntax
:MEASure:SOURce <sour>
:MEASure:SOURce?
Description
Set or query the signal source of the current measurement parameter.
Parameter
Name Type
<sour> Discrete
Explanation
Only channels currently turned on can be selected.

This command sets the signal source of all the measurement parameters except delay and phase.

The delay and phase measurements require two signal sources which can be set by
the :MEASure:SETup:DSA
and :MEASure:SETup:PSB
Return Format
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, CHAN1,
CHAN2 or MATH.
MSO2000A/DS2000A Programming Guide
Range
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|
D15|CHANnel1|CHANnel2|MATH}
and :MEASure:SETup:DSB,
commands respectively.
:MEASure:SETup:PSA
RIGOL
Default
CHANnel1
2-135