Rigol MSO2000A Series Programming Manual page 335

2 Command System
:TRIGger:USB:MLEVel
:TRIGger:USB:PLEVel
Syntax
:TRIGger:USB:MLEVel <level>
:TRIGger:USB:MLEVel?
:TRIGger:USB:PLEVel <level>
:TRIGger:USB:PLEVel?
Description
Set or query the trigger level of the D- or D+ data line in USB trigger. The unit is the same with the current
amplitude unit.
Parameter
Name Type
<level> Real
Note: For the VerticalScale, refer to the
the :CHANnel<n>:OFFSet
Return Format
The query returns the trigger level in scientific notation.
:TRIGger:USB:SPEed
Syntax
:TRIGger:USB:SPEed <value>
:TRIGger:USB:SPEed?
Description
Set or query the signal speed in USB trigger
Parameter
Name Type
<value> Discrete
Return Format
The query returns LOW or FULL.
MSO2000A/DS2000A Programming Guide
Range
When the D- data line or D+ data line is CHANnel1 or CHANnel2:
-5×VerticalScale–OFFSet to +5×VerticalScale–OFFSet
When the D- data line or D+ data line is any of D0-D15: -20V to 20V
:CHANnel<n>:SCALe
command.
Range
{LOW|FULL}
command. For the OFFSet, refer to
RIGOL
Default
0
Default
LOW
2-319