4.9.1 Shifting Deck Hydraulically
The hydraulic deck shift feature allows the Operator to select center, left, or right delivery from the windrower cab.
It is only available on the 25, 30, 35, and 40 ft. headers.
Refer to your windrower operator's manual for identification and operation of the deck shift control.
4.9.2 Shifting Deck Manually
To manually shift the deck, follow these steps:
Both decks can be moved manually to deliver the crop from
the center or right/left end on 25 to 40 ft. headers.
CAUTION
Stop engine and remove key from ignition before
leaving operator's seat for any reason. A child or
even a pet could engage an idling machine.
1. Loosen bolt (A) on the right deck.
2. Slide deck to close off the center opening. Retighten
bolt (A).
3. Reverse the draper drive motor hoses (A) on the
moved deck so that the draper turns the same direction
as the existing deck.
NOTE: Loosen clamp on plastic sleeve at drive
motor so that hoses (A) can be reversed.
Retighten clamp.
169594
OPERATION
Figure 4.64: RH deck shown
Figure 4.65: RH deck motor
78
Rev. C