Placing Fixture In Road Case - High End Systems DLHD High Definition Digital Light User Manual

CHAPTER 2
Setup and Configuration

Placing Fixture in Road Case

Before shipping the DL.3 fixture, lock its pan
and tilt position so the fixture does not move
during transit.
To lock the fixture:
1. Orient the projector head pan position as
shown for packing in the road case
2. Secure with the pan lock located on the
yoke base.
NOTE: This is the only pan position that
locks.
3. Move the tilt lock peg to the upper left
(locked) position.
4. Gently move the projector head and yoke
to verify that both pan and tilt positions are locked in place.
5. Place the DL.3
fixture in its
provided road
case for
shipping.
20
Tilt Lock
Pan Lock
1. Place Top over the fixture first
2 Bring sides of case together and latch.
.
DLHD Digital Light User Manual