Set Parameters Menu; Factory Default Settings; Pan/Tilt Swap - High End Systems SHOWGUN User Manual

CHAPTER 3
SHOWGUN® Menu System

Set Parameters Menu

The Set Parameters menu sets all factory options to their default settings or changes the factory
options individually.

Factory Default Settings

A SHOWGUN fixture ships with the following factory default settings:
DISABLED
Pan Tilt Swap=
Pan Invert= DISABLED
If any of the default settings are changed, this menu reverts to the
restores all factory defaults.
To check and reset factory defaults:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to
PARAMETERS MENU
3. Using the left and right arrows on the Center button, scroll to
ON
current state (
4. To reinstate the factory defaults if
Center button to scroll to

Pan/Tilt Swap

This option swaps the pan motor and tilt motor operation to
coordinate movements between fixtures on a link mounted
perpendicular to each other.
To swap Pan and Tilt:
1. Press the Menu button to unlock the menu system or to
move back up the system to the top level menus.
2. Using the left and right arrows on the Center button,
scroll through the top level to
SET PARAMETERS MENU
select.
3. Using the left and right arrows on the Center button,
scroll to PAN/TILT SWAP
DISABLED ) will be displayed.
4. Use the up and down arrows on the Center button to scroll to
DISABLED to revert fixture to default setting and press the Enter button to select.
20
Tilt Invert=
Display Level=
and press the Enter button to select.
OFF
or ) will be displayed.
OFF
ON
and press the Enter button to select.
and press the Enter button to
. The current state (
DISABLED
ON
is displayed, use the up and down arrows on the
ENABLED or
DISABLED
Lamp Life Limit=
Data Loss Timeout= SHORT
OFF ON
option. The
FACTORY DEFAULT SETTINGS
ENABLED
to swap pan and tilt or
SHOWGUN ®
option
SET
. The
User Manual