Factory Default Settings; Mirror 2 Quick Path - High End Systems Roadster Orbital Head System User Manual

CHAPTER 3
Operation and Maintenance

Factory Default Settings

The Orbital Head System system ships with the following factory default settings:
If any of the default settings are changed, this menu reverts to the OFF option. The ON option
restores all factory defaults.
To check and reset factory defaults:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top level to
SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to FACTORY DEFAULT
SETTINGS. The current state (ON or OFF) will be displayed.
4. To reinstate the factory defaults if OFF is displayed, use the up and down arrows on the
Navigation button to scroll to ON and press the Enter button to select.

Mirror 2 Quick Path

Turning this menu option ON directs the outer mirror to take the shortest path to the selected
position to provide very fast position changes. The default is OFF.
To turn Mirror 2 Quick Path ON:
1. Press the Menu button to unlock the menu system or to move back up the system to the
top level menus.
2. Using the left and right arrows on the Navigation button, scroll through the top level to
SET PARAMETERS MENU and press the Enter button to select.
3. Using the left and right arrows on the Navigation button, scroll to the MIRROR 2 QUICK
PATH.
4. Using the up and down arrows on the Navigation button, choose ON and press the Enter
button to store the option.
22
Display Invert=AUTO
Display Level=ON
Mirror 2 Quick Path=OFF
Roadster Orbital Head System User Manual