Control Function - High End Systems Roadster Orbital Head System User Manual

Control Function

The Control parameter provides access to a number of Power Hub and Projector commands
from the control desk.
Parameter DMX Value
Shutter Control
0-9
0-255
10-19
20-28
30-38
40-48
60-68
70-78
80-88
0
90-98
100-105
120-130
141-150
151-160
161-170
0-255
171-180
181-190
191-200
Roadster Orbital Head System User Manual
Control Option
Safe
Pan & Tilt MSpeed Off Sets Pan & Tilt MSpeed off.
Display Off
Display Dim
Display Bright
Home All
Home ILS
Lamp On
Lamp Off
ILS On
Shutdown
Horizontal offset right
Horizontal offset stop
Horizontal offset left
Vertical offset up
Vertical offset stop
Vertical offset down
Description
Disables all Control settings for normal operation.
Sets display to off.
Dims display characters.
Brightens the display characters.
Remotely homes the Orbital Head pan and tilt functions.
Remotely detects the projector's intelligent lens system
after a lens change and homes the focus and zoom .
Remotely restrikes the fixture's lamp.
Remotely extinguishes the fixture's lamp.
Remotely turns on the projector's intelligent lens system
on and allows focus and zoom control via RS-232. ILS off
is the projector's initial default. Use this option when the
ILS gets inadvertently turned off, or if the projector is
replaced.
Shuts down the fixture. The lamp is off, power to the
motors is disabled, and the display reads [SHUTDOWN].
Homing the fixture brings it back into operation.
These options are live so that the shutter can be open and
you can center the image on the mirror. The commands
work like a remote control. Issue a left command and the
lens moves left until a stop is issued, or the lens reaches
the end of travel. Likewise with up, down and right.
These commands are best written as presets that can
issued once rather then live dimming or scrolling from
command to command.
CHAPTER 4
DMX Programming
33