Color Parameters - High End Systems Shapeshifter C1 User Manual

CHAPTER 5
DMX Programming

Color Parameters

Each Module of a SHAPSHIFTER fixture is composed
of three groups of LEDs. In SHAPESHIFTER C1
fixtures, these are colored LEDs. When they are all
set at the same intensity level, they project as white.
In SHAPESHIFTER W1 fixtures, the LEDs are still
grouped but are all white.
The LED Red, LED Green, and LED Blue
parameters control the saturation (brightness level)
of each group of LEDs on a Module. Values for each
color parameter range from Off when the DMX value
= 0 to fully On when the DMX value = 255.
Reduced Protocol controls all the modules as a unit. For example, intensity set for one LED group
will affect that group on each module.
Enhanced Protocol gives you control of each group of LEDs on a module independant of other
modules.
The Mix Color Function parameter offers multiple options for controlling the LED color mixing
and output. In Enhanced protocol mode, there is a Mix Color Function for each module.
Mix Color DMX
Function Value
RGB 0-15
CMY 16-31
Cycle 32-47
Random 48-63
40
Mixes Red, Green and Blue
Mixes inverse of RGB . Red = Cyan, Green = Magenta, Blue = Yellow
Cycles through all the colors. Red channel controls cycle speed from slow to fast
Randomly selects color. Red channel controls intervals from slow to fast.
7
6
5
Description
SHAPESHIFTER User Manual
2
1
4
3