Power Hub Maintenance; Replacing The Power Hub Fuse; Replacement Parts; Cleaning The Mirrors - High End Systems Roadster Orbital Head System User Manual

Power Hub Maintenance

Replacing the Power Hub Fuse

Warning: Disconnect power before servicing.
To replace a fuse:
1. Disconnect power to the power supply hub.
2. Remove the three screws on the back of the power supply hub and lift the cover.
3. Locate the fuse on the bridge over the power supply.
4. Replace the Power supply fuse with the following:
Fuse Type and Rating
2.5 A, 250 V, Slow Blow

Replacement Parts

The Orbital Head System has no user-serviceable parts. To return it for servicing, call your
High End Systems dealer/distributor for a Return Material Authorization (RMA) number. High
End Systems cannot accept any goods shipped without an RMA number. For more
information, see "Warranty Information" on page v.

Cleaning the Mirrors

If the mirrors become dirty, clean them using a mild glass cleaner (containing no ammonia)
and a soft, lint-free cotton cloth.
Roadster Orbital Head System User Manual
This fixture must only be serviced by qualified
personnel. The following information is intended
to assist qualified personnel only.
Replace
fuses with the specified type and rating only.
Manufacturer
Littelfuse 215 02.5
Operation and Maintenance
High End Systems p/n
90403027
CHAPTER 3
29