Tech Programming Logs - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[856] TECH PROGRAMMING LOGS

This MMC lists the date, time and entry location of the last eight times that technician
programming was accessed. This will allow a technician to determine if there was
unauthorized access to system programming and where this access occurred.
The information stored in this log will consist of 2 elements, the date and time it occurred
at and the access location.
There are 4 types of access location information as described below:
Type
NNNN This would be the extension number of a phone that had accessed programming directly.
MODEM This would indicate that programming was accessed by PCMMC via the integrated
V90 modem attached to the IOM board of main cabinet.
LAN This would indicate that programming was accessed by PCMMC via the LAN
connection on the MCP2 card of main cabinet.
SIOx This would indicate that programming was accessed by PCMMC via one of the SIO
connections on the IOM board of the main cabinet where x is the number(2 or 3) of
the SIO port that was used.
CONDITIONS
NONE
DEFAULT DATA
NONE
ACTION
1) Press Transfer button and enter 856.
Display shows:
2) Enter index number.(e.g., 3)
OR
Press Volume button to scroll.
3) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 800
2-416
ENABLE TECHNICIAN PROGRAM
Description
DISPLAY
(1) 11/22 11:03
201 :11/22 11:27
(3) 11/22 12:30
203 :11/22 13:30
© SAMSUNG Electronics Co., Ltd.