Trunk Gain Control - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[421] TRUNK GAIN CONTROL

Allows loss levels to be adjusted on a per trunk basis. There are two adjustments available
in this MMC. 'TX' is the transmit level adjustment of the trunk to the station. 'RX' is the
receive level adjustment of the station to the trunk. See the Trunk Gain Setting Tables for
level option definitions.
There are four types of adjustments as shown below:
No
0
1
2
3
CONDITIONS
NONE
DEFAULT DATA
TX: +0.0
RX: +0.0
ACTION
1) Press Transfer button and enter 421.
Display shows:
2) Enter desired trunk number(e.g., 705)
via the dial pad.
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Press Volume button to make selection and
press Right Soft button to move cursor.
4) Press Volume button to make selection and
press Right Soft button to move cursor and
return to step 1.
5) Press ANS/RLS button to select all.
2-136
Trunk Gain
+0.0
+1.9
-6.0
-2.5
Description
No adjustment
Up 1.9 dB
Down 6.0 dB
Down 2.5 dB
DISPLAY
[701] TRK GAIN
RX:+0.0 TX:+0.0
[705] TRK GAIN
RX:+0.0 TX:+0.0
[705] TRK GAIN
RX:+0.0 TX:+0.0
[701] TRK GAIN
RX:+0.0 TX:-2.5
[ALL] TRK GAIN
RX:+0.0 TX:+0.0
© SAMSUNG Electronics Co., Ltd.