Samsung OfficeServ 500 Programming Manual page 58

Hide thumbs Also See for OfficeServ 500:

Table of Contents

CHAPTER 2. Ошибка! Стиль не определен.

1) Press Transfer button and enter 107.

Display shows first station:

2) Dial station number.(e.g., 205)

Use Volume button to scroll through station numbers

and press Right Soft button to move the cursor.

3) Press Right Soft button to program the phone.

Use Volume button to scroll through the phone and

AOM's and use Right Soft button to move the cursor.

4) Enter key number.(e.g., 18)

Use Volume button to scroll through keys and

use Right Soft button to move the cursor.

Press the key to be programmed.

Dial extender according to above table.

System will return to this step. If no more entries,

press Left Soft button to return to step 2.

5) Press Transfer button and enter to exit.

Press Speaker button to advance next MMC.