Assign System Speed Dial - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[705] ASSIGN SYSTEM SPEED DIAL

Enables the assignment of system speed dialling numbers. There are up to 500 entries
available(950 entries when MMC 861 SYSTEM SPEED BIN is set to MAX 950) for
programming(see MMC 606). Each speed dial number consists of a trunk or trunk group
access code followed by a separator and up to 24 digits to be dialed. These dialed digits
may consist of 0-9, and #. If the system recognizes a valid trunk or trunk group access
number, it will automatically insert the separator.
CONDITIONS
NONE
DEFAULT DATA
NONE
PROGRAM BUTTONS
B Used to insert a flash code 'F'
C Used to insert a pause code 'P'
D Used to insert a pulse/tone conversion code 'C'
E Used to mask/unmask following digits-shows as '[' or ']'
F Used to enter name for speed dial bin(see MMC 706)
ANS/RLS Used to save the speed dial number and name to the MMC 728 CID
translation table.
ACTION
1) Press Transfer button and enter 705.
Display shows:
2) Dial speed index desired.(e.g., 505)
OR
Press Volume button to make selection and
press Right Soft button to move cursor.
3) Enter access code(e.g., 9/701) plus the phone
number up to 24 digits(digits will scroll under)
and press Right Soft button to return to step 2.
4) Press F key to toggle to MMC 706 step 3 to enter
name.
2-224
DISPLAY
SYS SPEED DIAL
500:
SYS SPEED DIAL
505:
SYS SPEED DIAL
505:9–121223456789
SYS SPEED NAME
505:
© SAMSUNG Electronics Co., Ltd.