Samsung OfficeServ 500 Programming Manual page 449

No Code
- MJD--
51 MJD18
52 MJD19
53 MJD20
54 MJD21
55 MJD22
-
MJE--
56 MJE01
57 MJE02
58 MJE03
59 MJE04
60 MJE05
61 MJE06
62 MJE07
63 MJE08
64 MJE09
© SAMSUNG Electronics Co., Ltd.
Alarm Name
DTRK Error ISDN or E1 card Fault
E1 Restart The E1 card has restarted
Alarm Data = Cabinet, Slot(Cx-Syy)
PRI Restart The PRI card has restarted
Alarm Data = Cabinet, Slot(Cx-Syy)
BRI Restart The BRI card has restarted
Alarm Data = Cabinet, Slot(Cx-Syy)
PCM Loss Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot(Cx-Syy)
PCM Recovery Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI Error MGI card Fault
MGI Restart The MGI card has restarted
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI Stop The MGI card has stoped
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI IP Duplicate The MGI card IP address is duplicated
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI NTWK Error The MGI card has blocked because the system detects
the card doesn't response via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI NTWK Rec The MGI card has restarted because the system detects
the card does response via network link.
External ping test.
Alarm Data = Cabinet, Slot(Cx-Syy)
MGI DSP Error The MGI card DSP has blocked because the system
detects the card DSP runs not correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
MGI DSP Run The MGI card DSP has restarted because the system
detects the card DSP runs correctly.
Alarm Data = Cabinet, Slot(Cx-Syy-Pzz)
WBS Disconnect Indicates the WBS is disconnected.
Alarm Data = CWBS:xx or BWBS:xx
WBS connect Indicates the WBS is connected.
Alarm Data = CWBS:xx or BWBS:xx
OfficeServ 500 Programming Guide
(Continued)
Definition
2-407