Edit Text Message - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[117] EDIT TEXT MESSAGE

Allows the system administrator or technician to set or change text message for any station.
One station can use up to 10 text messages.
CONDITIONS
In MMC 611 Text Message Station set USED station only uses this feature. In case of a
large LCD phone, system set to USED automatically.
INPUT CHARACTERS
Refer to 'INPUT CHARACTERS' in 'MMC [104] STATION NAME'.
DEFAULT DATA
BLANK MESSAGE
ACTION
1) Press Transfer button and enter 117.
Display shows:
2) Dial station number.(e.g., 205)
OR
Press Volume button to select station and press
Right Soft button to move cursor.
3) Dial 01~10 to select message.
OR
Press Volume button to select message and press
Right Soft button to move cursor.
4) Enter messages using above table and press
Right Soft button to return to step 3.
5) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
MMC 611
2-32
TEXT MESSAGE STATION
DISPLAY
[201] TXTMSG(01)
Blank Message
[205] TXTMSG(01)
Blank Message
[205] TXTMSG(02)
Blank Message
[205] TXTMSG(02)
SAME TIME
© SAMSUNG Electronics Co., Ltd.